Varnish Range
Back to Top
Epifanes Clear Gloss Varnish
Highest quality marine varnish This varnish is manufactured
with a long base of 100% tung oil combined with non-yellowing
urethane and alkyd resins blended with a perfected
balance of ultra violet filters
World famous for its high gloss retention, long lasting
properties, unique flowing characteristics and high
build capacity, it is regarded by many as the finest
of all yacht varnishes
Epifanes Rubbed Effect (Satin) Interior Varnish
The finest available for a rich satin lustre; for
use preferably on interior work A quick drying, clear
one-part, satin finish based on poly-urethane alkyds
This interior finish gives optimum protection against
alcohol and chemicals Apply as a finishing coat over
several build-up coats of EPIFANES Clear Gloss Varnish
Epifanes Teak and Tropical Wood Finish
Formulated to give excellent adhesion to new teak
and other exotic woods with extraordinary protection,
even in tropical climates. For use where a glossy,
varnished look is desired in exterior and interior
conditions Provides a hard, clear, high gloss finish
that looks like conventional varnish without much
of the sanding and expertise required of a varnish
formulation
Paint Range
Back
to Top
Colour Chart
Epifanes Yacht Enamels
Vivid colour brilliance, superior covering and flowing
properties are the hallmarks of these high gloss enamels
The finest components possible give a hard protective
finish The preferred paint for many of the worlds
finest yachts, giving long lasting protection in any
climate
Epifanes Mono-Urethane Paints
An innovative one-part urethane formula developed
to give the tough durability of a two-part system
while providing the application ease of standard enamels
This finish results in a higher gloss than given by
conventional urethane methods and fully cures to a
remarkable degree of hardness in just 24 hours.
Epifanes Poly-Urethane Paints
A highly advanced two-component polyurethane system
Special flow characteristics produce mirror-like results
Rich, brilliant colours with extra-ordinary gloss
together with unsurpassed urethane toughness give
many years of beautiful, lasting protection. When
applied by brush or spray, optimum leveling and flow
features will produce a high gloss finish which cures
tack free in one hour
Anti-Slip Preparations
Back
to Top
In order to obtain a non-skid surface on
decks, add EPIFANES Non-Skid beads to the last two
coats of Poly-Urethane (two component) or replace
these last two coats by two coats of Non-skid Deck
Coating (one component) or by two coats of Monourethane
(one component) to which EPIFANES Non-Skid beads have
been added. Apply by roller as brushing will not produce
as even a coat. Allow at least 72 hours for the system
to cure.
Note: It is known in the trade that sprinkling silver(white)
sand into the finishing paint coats produces a non
slip surface. This is true, but the sand does not
become a component part of the paint finish (unlike
Non-Skid beads), and the sand soon comes out leaving
an unsightly pock-marked paint surface. For an effective,
long lasting anti-slip surface - use EPIFANES Non-Skid
Beads.
Extra UV Resitant Colours
Back
to Top
Epifanes Nautiforte is a one-component
finish, based on siliconised alkyd resons. This finish
provides outstanding weather durability, long lasting
gloss retention, rapid wet film drying, minimal dirt
retention and is non yellowing. This makes it ideal
for arduous conditions, particularly hot climates,
and can be used on wood, steel, aluminium and fibreglass
above the waterline in combination with the appropriate
primers, or directly over well degreased and sanded
fibreglass.
Further technical information, product and colour
guides are available on request. Please contact our
sales office for further details.
Please contact us if you would like more information,
advice or have any comments.
Robbins Timber Mail Order -
Simple Worldwide Delivery with no minimum order value.
Brookgate